banenr

Annilte Cutting resistant grey double-sided wool Novo felt conveyor belt for cnc cutting machine

The Novo conveyor belt is also known as Anti-cut belt.
They do not cut easily unlike a PVC or PU belt would.
Novo conveyor belt is made of non-woven (needled) polyester and impregnated with a special rubber Latex.
This permits excellent resistance to abrasion and cutting, low noise and minimal stretch when sized and tensioned properly.

  • Key words: Novo felt conveyor belt
  • Material: Novo material
  • Color: Black and green
  • Product Detail

    Product Tags

    "The Felt conveyor belt is mostly used for cut and wear resistant application industries, likely automotive industries, sheet metal handling and tire industries.The conveyor belt is specially designed to work with all knife cutting tables & systems."
    "This material is designed to allow the full vacuum power of the cutting table to hold materials firmly in place while also providing the durability needed for cutting tough industrial materials."
    The antistatic types are used in electronic, optical and computer industry.

    double_felt_detail

    Key words
    Novo felt conveyor belt
    Material Novo material
    Color Black and green
    Thickness 2.5mm/4mm/5.5mm
    Joint Welded
    Antistatic 109~1012
    Temperature range -10℃-150℃
    Size Customized
    Max width 300mm
    Certification ISO9001 & ISO14001
    Application Cutting table, paper industry & tyre industry

    Conveying surface features

    Anti-static, flame retardant, low noise, impact resistance Splice Types: Preferred Wedge splice,others open splice Main features: Excellent sports performance, good abra sion resistance, low elongation, high electrical conduct! vity, excellent flexability Available : roll belt endless blet Pre-opening belt or bonding Note: Novo conveyor cutting underlay belt material can be cut to custom widths. Pleae contact me with your requirements.

    Install Digital Flatbed Cutter Machine Felt Belt - Eight Steps

    Installing Cutting Machine Felt Belt is very Simple and Fast!

    1. Wear Felt Belting on the machine
    Pass Novo Belt through the bottom roller and place the open teeth on both sides of the cutting table to facilitate subsequent joints

    2. The tooth weight is well pressed
    After aligning Cutter Mat, use weights on both sides of the open teeth of the Felt Belts to prevent slippage.

    3. Glue
    Apply glue evenly around the diamond teeth. Pay attention to pad some waste paper when applying glue to prevent glue from leaking
    to the table and block the air inlet.

    4. The tooth bonding
    After the glue is applied, align the two sides of the teeth and press them to level.

    5. Press teeth to ensure neatness
    Make sure that the teeth and teeth are aligned neatly to prevent deviations after the joint.

    6. Hot pressing
    Place a super long Teflon cloth under the joint, and adjust the industrial iron to 80 degrees for preheating. After the preheating is completed, place a rectangular Teflon cloth on the underside of the iron for ironing back and forth on the teeth.

    7. Chisel
    We recommend using hard objects to help us remove the glue left on the teeth and make the teeth press.

    8. Edge banding
    Stick the edge cloth to the left and right sides of the joint, and press it with an iron."

    Details pictures

    detail
    detail
    detail
    detail
    detail
    detail

  • Previous:
  • Next: