The height of retaining edge is 60-500mm. base tape is composed of four parts: upper cover rubber, lower cover rubber, core and transverse rigid layer. The thickness of the upper covering rubber is generally 3-6mm; the thickness of the lower covering rubber is generally 1.5-4.5mm. The core material of the belt bears the tensile force, and its material can be cotton canvas (CC), nylon canvas (NN), polyester canvas (EP), or rigid rope core (ST). In order to increase the transverse rigidity of the baseband, a special reinforcing layer, called transverse rigid layer, is added to the core. The width specification of the base tape is the same as that of ordinary adhesive tape, which conforms to the standard regulations of GB7984-2001.
Detailed introduction
Baffle can make all kinds of bulk materials to 0-90 degrees for any inclination angle continuous conveying, has a large conveying angle, wide range of use, covers an area of small. It has the features of large conveying angle, wide range of use, small footprint, no transfer point, reduced investment in civil engineering, low maintenance cost, large conveying capacity, etc. It solves the problem of conveying angle which cannot be reached by ordinary conveyor belt or pattern conveyor belt.
The bottom of the edge and spacer and the base belt are hot vulcanized into one piece, and the height of the baffle and spacer can reach 40-630mm, and canvas is pasted in the baffle to strengthen the tear strength of the baffle.
The base tape consists of four parts: the upper cover rubber, the lower cover rubber, the core and the transverse rigid layer. The thickness of the upper cover rubber is generally 3-6mm; the thickness of the lower cover rubber is generally 1.5-4.5mm. the core material is subject to tensile force, and its material can be cotton canvas (CC), nylon canvas (NN), polyester canvas (EP) or steel wire rope (ST). In order to increase the transverse rigidity of the baseband, a special reinforcing layer, called the transverse rigidity layer, is added to the core. The width specification of the base tape is the same as that of ordinary adhesive tape, which conforms to the standard regulations of GB/T7984-2001.
Post time: Sep-21-2023