Ibhanti yePolyester Mesh yokomisa ukutya nemifuno
Ibhanti yokuhambisa iMesh yeLaphu lePolyester yeBanga lokutya eliyi-100% lokuSomisa iMifuno yeziqhamo
Iimpawu zezinto eziphathekayo
I-Polyester (PET): Ibonakaliswa kukumelana nobushushu obuphezulu (ngokuqhelekileyo inokumelana ne--40℃ ~ 200℃), ukumelana nokugqwala, amandla aphezulu okutsalwa, akulula ukuyitshintsha, kwaye ihambelana nemigangatho yokhuseleko lomgangatho wokutya.
Ulwakhiwo lwefayibha: Lulukiwe nge-polyester monofilament okanye i-multifilament, inomphezulu ogudileyo kunye nomoya ovulekileyo, ifanelekile ukomisa ukutya ngokulinganayo
| Ibhanti yokuhambisa iPolyester Mesh | |||||||
| Uhlobo lokuluka | Imodeli | Ububanzi bomsonto | Uxinano (Iinombolo/cm) | Ubukhulu (N/cm) | Ukuvunyelwa komoya (m³/m²h) | ||
| (mm) | |||||||
| I-Warp | I-Weft | I-Warp | I-Weft | ||||
| Ilaphu lokuluka elilula elineeshedi ezimbini | AN_PO_01 | 0.75 | 0.8 | 4.7-5 | 4.8-5 | 940 | >20000 |
| AN_PO_02 | 1 | 1 | 4.7-5.2 | 4.3-5 | 1600 | >15000 | |
| AN_PO_03 | 0.7 | 0.7 | 8 | 7 | >=1600 | 11000 | |
| AN_PO_04 | 0.7 | 1 | 6.6-7 | 4.3-4.6 | 1100 | >15000 | |
| AN_PO_05 | 0.55 | 0.55 | 7.5-8 | 8.5-9 | 850 | 850-6500 | |
| AN_PO_06 | 0.45 | 0.45 | 10 | 8.6 | 1600 | 16000 | |
| AN_PO_07 | 0.5 | 0.5 | 8.5-9 | 10-10.5 | 750 | >10000 | |
| AN_PO_08 | 0.5 | 0.5 | 13.5 | 8.5 | 1800 | 6500 | |
| Ilaphu lokuluka elilula elineshedi ezintathu | AN_PO_09 | 0.5 | 0.6 | 10 | 9 | 1600 | 14000 |
| AN_PO_10 | 0.9 | 0.9 | 7.8-8 | 5-5.5 | 2100 | 7500-8500 | |
| AN_PO_11 | 0.7 | 0.8 | 8 | 8 | 1600 | 10000 | |
| AN_PO_12 | 0.3 | 0.35 | 22 | 14.5 | 1200 | 13000 | |
| AN_PO_13 | 0.3 | 0.4 | 22 | 14.5 | 1200 | 13500 | |
Iingenelo zeMveliso yethu
Ayinavumba kwaye ayinatyhefu:Yenziwe ngezinto ze-polyester ezicocekileyo kakhulu (PET), ezingakhuphi iigesi eziyingozi kumaqondo obushushu aphezulu kwaye azichaphazeli incasa yokutya.
Ayinazolula kwaye ayigugi:Ukusebenzisa i-polyester monofilament enamandla aphezulu kunye ne-low-extension okanye i-multi-stranded wire weaving, amandla okutsalwa angcono kuneebhanti ze-mesh eziqhelekileyo, kwaye akulula ukuyikhulula okanye ukuyiqhawula xa isetyenziswa ixesha elide.
Unyango lokunganamatheli luyimfuneko:Kwizinto ezinamafutha amaninzi aneswekile (ezifana nee-preserves kunye nee-pastries), ii-PTFE okanye ii-mesh belts ezigqunywe nge-silicone ziyafumaneka ukuze kuncitshiswe ukunamathela kunye nentsalela.
Ufakelo oluLula:Iindidi ezahlukeneyo zeejoyinti ziyafumaneka (i-spiral buckle, i-chain, i-seamless splicing, njl.njl.), ezifanelekileyo kwizixhobo zokomisa eziqhelekileyo ezisebenza ngokusebenza okuphezulu.
Ukwenziwa ngokwezifiso okuguquguqukayo:lungisa ubungakanani be-mesh (0.5mm ~ 15mm), ububanzi (10mm ~ 5m) kunye nombala (ocacileyo, omhlophe, oluhlaza okwesibhakabhaka, njl.njl.) ngokweemfuno zomthengi ukuze kuhlangatyezwane neemfuno zokomisa zeentlobo ezahlukeneyo zokutya (iigranules, iiflakes, ulwelo olugqunywe).
Kutheni Ukhetha Thina
Inkqubo yokusonga:inkqubo entsha yokusonga ephandwe yaza yaphuhliswa, ethintela ukuqhekeka, ehlala ixesha elide;
Ibha yesikhokelo eyongeziweyo:ukubaleka okubushelelezi, ukuthintela ucalucalulo;
Iingcamango ezichasene nobushushu obuphezulu:inkqubo ehlaziyiweyo, ubushushu bokusebenza bunokufikelela kwi-150-280 degrees;
Imeko ezisebenzayo
Ukomiswa kweziqhamo nemifuno:imifuno eyomileyo, iziqhamo ezomisiweyo, amakhowa.
Ukomisa inyama:ibhekoni, isoseji, intlanzi eyomileyo.
Ukubhaka ipasta:iikuki, isonka, iinoodles.
Abanye:iti, amantongomane, ukutya kwezilwanyana zasekhaya, njl.
Iinkcukacha ezicetyiswayo kwiintlobo ezahlukeneyo zokutya
| Uhlobo lokutya | Ubungakanani beMesh obucetyiswayo | Uhlobo lweBhendi olucetyiswayo |
|---|---|---|
| Imifuno/Izilayi zeziqhamo | 1mm ~ 3mm | I-monofilament elukiweyo, ikwazi ukuphefumla kakuhle |
| Inyama/I-Jerky | 3mm ~ 8mm | Ilukwe ngemicu emininzi, inzima kakhulu |
| Iibhisikithi/Ivenkile yokubhaka | 2mm ~ 5mm | Igqunywe nge-PTFE, ayinamatheli |
| Amagqabi eti/imifuno | 0.5mm ~ 2mm | I-mesh entle, ethintela ukuvuza |
| Iinoodles/iVermicelli | 4mm ~ 10mm | Imingxunya engxande, ethintela ukuqhekeka |
Uqinisekiso loMgangatho Uzinzo loNikezelo
Iqela le-R&D
UAnnilte uneqela lophando nophuhliso eliquka iingcali ezingama-35. Ngobuchule obuqinileyo bophando lobuchwephesha nophuhliso, sinikezele ngeenkonzo zokwenza ngokwezifiso i-conveyor belt kumacandelo oshishino ali-1780, kwaye sifumene ukuqatshelwa nokuqinisekiswa ngabathengi abangaphezu kwama-20,000. Ngamava ophando nophuhliso avuthiweyo kunye namava okwenza ngokwezifiso, sinokuhlangabezana neemfuno zokwenza ngokwezifiso kwiimeko ezahlukeneyo kumashishini ahlukeneyo.
Amandla eMveliso
I-Annilte inemigca yemveliso eli-16 ezenzekelayo ngokupheleleyo engeniswe eJamani kwindawo yayo yokusebenzela edibeneyo, kunye neminye emibini eyongezelelweyo yemveliso yokuxhasa imeko kaxakeka. Le nkampani iqinisekisa ukuba isitokhwe sokhuseleko sazo zonke iintlobo zezinto ezikrwada singaphantsi kweemitha zesikwere ezingama-400,000, kwaye xa umthengi engenise iodolo yongxamiseko, siza kuyithumela imveliso kwiiyure ezingama-24 ukuze siphendule iimfuno zomthengi ngokufanelekileyo.
UAnnilteyiibhanti lokubonisaumenzi onamava eminyaka eli-15 eTshayina kunye nesiqinisekiso somgangatho we-ISO yeshishini. Sikwangumvelisi wemveliso yegolide eqinisekisiweyo yi-SGS kwihlabathi liphela.
Sinikezela ngezisombululo ezahlukeneyo zebhanti ezinokwenziwa ngokwezifiso phantsi kophawu lwethu, "U-ANNILTE."
Ukuba ufuna ulwazi oluthe kratya malunga neebhanti zethu zokuhambisa impahla, nceda ungathandabuzi ukuqhagamshelana nathi.
I-WhatsApp: +86 185 6019 6101 Ucingo/WeCumnqwazi: +86 185 6010 2292
E-iposi: 391886440@qq.com Iwebhusayithi: https://www.annilte.net/
